A SERVICE OF

logo

50 InfraStruXure InRow RC Service
Control Board
Tools
Torx screwdriver, #1 Phillips screwdriver
Replacement
1. Remove power to the unit by disconnecting both power cords (feed A and feed B).
2. Lockout/tagout the unit being serviced.
3. Remove the rear door and the bottom air filter.
4. Use a standard screwdriver
to remove the plastic
pushclips securing the cover.
Remove the plastic cover
from the electronic
components.
Electrical
Hazard
This device may be connected to more than one input power source. Verify
that both feed A and feed B have been disconnected before attempting
maintenance.