SafetySafety Hazards in the InRow RC
4 InfraStruXure InRow RC Service
Total Power Off
Moving Parts
Lock-out/Tag-out
Tools and Parts
Multiple Power Sources
Tipping Hazard
Caution
Ensure a tight connection at the drain hose bib before draining the unit.
Caution
The hoses will contain water/glycol. Use care to avoid spills in the unit.
Electrical
Hazard
Disconnect the plugs for both power feeds (A and B) to remove power from the unit.
Warning
The InRow RC contains moving parts such as fans. Use care when servicing
components that are behind air blocks or separated by doors or access panels.
Warning
Make sure to follow your site’s lock-out/tag-out procedures that remove access to a device
and physically label the device as intentionally out of service while servicing this
equipment.
Caution
Ensure that all spare parts and tools are removed from the equipment before operating it.
Electrical
Hazard
This device may be connected to more than one input power source. Verify that both
feed A and feed B have been disconnected before attempting maintenance.
Tip Hazard
The unit has a high center-of-gravity. use extreme caution to prevent tipping when
unpacking or moving the unit to its final location.
