P bAU d b 600
b 1200
b 2400
b 4800
b 9600
Sets the required baud
rate (speed for the RS-
232 communications).
Default rate is 4800.
PAritY 8 n 1
7 E 1
7 o 1
8 data bits, no parity
7 data bits, even parity
7 data bits, odd parity
U id “U id”
“ Abc234”
“ “
Shows the current user ID (if any).
Enter a new User ID as described in the Description
under the PLU section. The ID can be alpha-
numeric but is limited to 6 characters.
SC id “Sc id”
“ Abc234”
“ “
Shows the current scale ID (if any).
Enter a new Scale ID as described in the
Description under the PLU section. The ID can be
alpha-numeric but is limited to 6 characters.
tECH
Allows access to the Technical parameters using a
password. Not normally accessed by user.
8.0 BATTERY OPERATION
• The scales can be operated using the battery. The battery life is
approximately 70 hours if only the basic unit is used. If a second
platform is used the battery life will be reduced.
• When the battery needs charging the arrow above the low
battery symbol under the “Weight” display will turn on. The
battery should be charged as soon as the arrow above the
symbol is on. The scale will still operate for about 10 hours after
which it will automatically switch off to protect the battery.
• To charge the battery simply plug into the mains power. The
scale need not to be turned on.
• The battery should be charged for 12 hours for full capacity.
• Just under the “Count” display is an LED to indicate the status
of battery charging. When the scale is plugged into the main
power the internal battery will be charged. If the LED is green
© Adam Equipment Company 2007
24
