VDSL Configuration
3-65
CLI – Use the show interfaces counters command.
Example
VDSL Line Configuration
Command Attributes
• Line – Select the VDSL line for configuration from the drop-down list.
• Local/Remote – In this version this may only be set to Local, indicating that the
line configuration applies to the line connection from the switch to the CPE.
• Coding – Specifies the VDSL coding type used on this line.
The types of code are:
1. Others (none of the following)
2. Multiple Carrier Modulation
3. Single Carrier Modulation
• Type – Defines the type of VDSL physical line by defining whether and how the
line is channelized.
The types of line are:
1. No channels exist
2. Only fast channels exist
3. Only interleaved channels exists
4. Either fast or interleaved channels exist
5. Both fast and interleaved channels exist
Console#show interfaces counters ethernet 1/11 4-92
Ethernet 1/11
Iftable stats:
Octets input: 19648, Octets output: 714944
Unitcast input: 0, Unitcast output: 0
Discard input: 0, Discard output: 0
Error input: 0, Error output: 0
Unknown protos input: 0, QLen output: 0
Extended iftable stats:
Multi-cast input: 0, Multi-cast output: 10524
Broadcast input: 136, Broadcast output: 0
Ether-like stats:
Alignment errors: 0, FCS errors: 0
Single Collision frames: 0, Multiple collision frames: 0
SQE Test errors: 0, Deferred transmissions: 0
Late collisions: 0, Excessive collisions: 0
Internal mac transmit errors: 0, Internal mac receive errors: 0
Frame too longs: 0, Carrier sense errors: 0
Symbol errors: 0
RMON stats:
Drop events: 0, Octets: 734720, Packets: 10661
Broadcast pkts: 136, Multi-cast pkts: 10525
Undersize pkts: 0, Oversize pkts: 0
Fragments: 0, Jabbers: 0
CRC align errors: 0, Collisions: 0
Packet size <= 64 octets: 9877, Packet size 65 to 127 octets: 93
Packet size 128 to 255 octets: 691, Packet size 256 to 511 octets: 0
Packet size 512 to 1023 octets: 0, Packet size 1024 to 1518 octets: 0
Console#
