A SERVICE OF

logo

Open as PDF
next previous
System Management Commands
4-47
sntp broadcast client
This command synchronizes the switch’s clock based on time broadcast from time
servers (using the multicast address 224.0.1.1). Use the no form to disable SNTP
broadcast client mode.
Syntax
[no] sntp broadcast client
Default Setting
Disabled
Command Mode
Global Configuration
Example
show sntp
This command displays the current time and configuration settings for the SNTP
client, and indicates whether or not the local time has been properly updated.
Command Mode
Normal Exec, Privileged Exec
Command Usage
This command displays the current time, the poll interval used for sending
time synchronization requests (when the switch is set to SNTP client mode),
and the current SNTP mode (i.e., client or broadcast).
Example
Console(config)#sntp broadcast client
Console#
Console#show sntp
Current time: Dec 23 05:13:28 2002
Poll interval: 16
Current mode: unicast
Console#