Filter
Top Products
Using the Menu
38
List of Menu Items
• Some settings cannot be selected unless the previous
menu item is set to “ON.”
• “– – –” appears to the left of settings that cannot be
selected.
Notes
Page Menu Item Settings
(default in [ ])
Function
01 FUNCTION ASSIGN. 1 KNEE/PRST/
[MONO]/MAG/
UPTLY/PEAK+/
GUIDE/WFM
For assigning a function to the ASSIGN. 1 switch.
Detailed settings of the individual features can be specified
on the respective menu pages.
KNEE: Toggles the KNEE correction circuit between ON
and OFF
PRST: Toggles PRESET between ON and OFF (see
PRESET menu on the page 42)
MONO: Toggles the black-and-white display between ON
and OFF
MAG: Toggles the magnification function between ON
and OFF (Press and hold for one second or more to
select the area to magnify)
UPTLY: Toggles UP TALLY between ON and OFF
PEAK+: Toggles the peaking mode between STD and
PLUS (Press and hold for one second or more to
execute COLOR DETECT)
GUIDE: Toggles GUIDE FRAME between ON and OFF
WFM: Toggles WAVEFORM between ON and OFF
ASSIGN. 2 KNEE/PRST/
MONO/[MAG]/
UPTLY/PEAK+/
GUIDE/WFM
For assigning a function to the ASSIGN. 2 switch.
The assignable functions are the same as those for
ASSIGN. 1.
KNEE [OFF]/ON For turning the KNEE correction circuit ON or OFF.
MONOCHROME [OFF]/ON For selecting color display (OFF) or black-and-white display
(ON).
CHROMA –99 to [0] to 99 For setting the chroma level.
Lowering the value decreases the chroma level.
PEAKING PLUS
SW
[MODE1]/MODE2 For selecting the operation mode upon pressing the
ASSIGN. switch that is assigned the PEAKING PLUS
function.
MODE1: Toggles the PEAKING MODE STD h PLUS
MODE2: Toggles in the sequence of STD t COLOR t
AREA t BOTH t STD
02 TALLY/IND UP TALLY OFF/[ON] For controlling the up-tally lamp.
ON: Enables up-tally lamp
OFF: Disables up-tally lamp (Does not light up even
when the camera receives red tally signals)
UP TALLY DIM 1 to [5] to 10 For setting the brightness of the up-tally lamp.
Raising the value increases the brightness; lowering the
value decreases the brightness.
TALLY/IND OFF/[ON] For activating all tally lamps and indicators (ON) or
activating only the BATT indicator (OFF).
TALLY/IND DIM 1 to [5] to 10 For setting the brightness of the tally lamps and indicators.
Raising the value increases the brightness; lowering the
value decreases the brightness.