Filter
Top Products
Using the Focus Assist Function
32
Attaching a Number Plate
Insert the tabs on the sides of the number plate into each
slit in the up-tally lamp.
Using the Focus Assist
Function
For details on menu operations, see “Using the Menu”
on page 36.
PEAKING PLUS Function
This function can be used to sharpen the edges of an
image that is specified using the color, area selected, or
both. You can also enhance the edges of the entire image.
This function has no effect on the camera’s video output
signals.
To sharpen edges by specifying the color
1 Press the ASSIGN. switch that is assigned the
PEAKING PLUS function to switch to the
PEAKING PLUS mode.
You can also set to this mode using “PEAKING
MODE” from the PEAKING menu (see page 39).
2 Select “COLOR” under “COLOR/AREA SEL” of
the PEAKING menu.
3 Press and hold the ASSIGN. switch that is assigned
the PEAKING PLUS function for 1 second or more
(the detection area marker appears in the center of
the screen), align the color to be corrected in the
detection area marker, and then release the switch.
The color that is to be corrected will be detected.
: Effective edge enhancement area
4 Adjust the effective edge enhancement area of the
color using the following menus in the PEAKING
menu.
• HUE PHASE: Hue center position
• HUE WIDTH: Hue range
• SAT WIDTH: Saturation range
1
Up-tally lamp
Number plate
Slit
Detection
area marker