Filter
Top Products
In order to prevent electric shock and short circuit, be sure to turn off the power
before performing work on the interior parts of the product.
Be careful not to damage wiring. Damaged wiring can cause electric shock or short
circuit.
Do not touch places other than those specified. Touching unspecified places can
cause an electric shock or short circuit.
9. SHIFT LEVER
1
2
3
4
If the Shift Lever operation is not satisfactory, remove the Shift Lever according to the following procedure
and replace the microswithch.
9 - 1 REMOVING THE SHIFT LEVER
By following “8-1 REMOVING THE HANDLE MECHA”, turn the power off, remove the STEERING
HANDLE, and remove the CONTROL PANEL COVER.
Take out the 4 Hexagon Bolts.
Pull up the SHIFT LEVER slowly until the 2 wiring connectors can be seen.
Disconnect the 2 connectors.