Filter
Top Products
4 . ASSEMBLING AND INSTALLATION
Note that the tools such as a phillips screwdriver and wrench for M16 hexagon bolt w/24 mm width
across flats are required for the assembly work.
When carrying out the assembly work, follow the procedure in the following 5-item sequence:
ASSY OF THE CABINET
SECURING IN PLACE (ADJUSTER ADJUSTMENT)
POWER SUPPLY
ASSEMBLING CHECK
•Assembling should be performed as per this manual. Since this is a
complex machine, erroneous assembling may cause damage to the
machine, or malfunctioning to occur.
•When assembling, be sure to perform work by plural persons.
Depending on the assembly work, there are some cases in which
a single person performing the work can cause personal injury
or parts damage.
•Be careful so as not to damage wirings. Damaged wiring can cause
electric shock and short circuit hazards.
1
2
3
4
1
ASSY OF CABINET
Permanantly tightening the hex bolts should not be completed until
the leg levelers are adjusted properly.
NOTE: Game is shipped fully assembled. No assembly required.