Filter
Top Products
The “COIN ASSIGNMENTS” mode permits you to set the start number of credits, as well as the basic numbers
of coins and credits. This mode expresses “how many coins correspond to how many credits.”
SETTING CHANGE PROCEDURE
Press the SERVICE BUTTON to move the arrow to the desired item.
Change the desired item setting by using the TEST BUTTON.
To return to the MENU mode, move the arrow to EXIT and press the TEST BUTTON.
B COIN ASSIGNMENTS
1
2
3
COIN ASSIGNMENTS
COIN CHUTE TYPE COMMON
COIN/CREDIT SETTING #1
COIN CHUTE #1
1 COIN 1 CREDIT
COIN CHUTE #2
1 COIN 1 CREDIT
MANUAL SETTING
SEQUENCE SETTING
-> EXIT
SELECT WITH SERVICE BUTTON
AND PRESS TEST BUTTON
Setting changes cannot be stored unless the TEST BUTTON is pressed
while the arrow is on EXIT.
(COMMON SETTING)
(A)
(B)
(C)
(D)
(A) COIN CHUTE TYPE (COMMON, INDIVIDUAL)
Set to COMMON.
Up to 2 Coin Chutes (#1 and #2) can be used and also, (B) COIN/CREDIT SETTING ratio can be set seperately
for #1 and #2.
(B) COIN/CREDIT SETTING (#1 ~ #27)
Sets the credit increase increment per coin insertion. There are 27 settings from #1 to #27, expressed in
credit(s) as against coins inserted. #27 refers to FREE PLAY.