Filter
Top Products
Document 800-07422 Rev A 47
08/10
4
Installing UltraKey Lite with MAXPRO-Net
In this section:
• Navigating the LCD Configuration Menus, page 47
• Installing and Configuring a Serial Connection, page 49
• Installing and Configuring an Ethernet Connection, page 56
• (Optional) Configuring UltraKey Lite Using the Web Browser, page 60
Note For all installations, refer to the applicable MAXPRO-Net installation or user
guides for more information.
This section explains how to connect the UltraKey Lite controller to MAXPRO-Net and how
to enter the basic configuration settings specific to MAXPRO-Net. For other user
configurations see the index or table of contents.
Navigating the LCD Configuration Menus
Note The use of the arrow keys under the LCD is used for the following instructions.
See Figure 4-1. Also see Using the UltraKey Lite to Navigate the LCD Menus
on page 22 for detailed instructions for other ways to navigate or System
Administration Using the Controller LCD on page 65 for a configuration menu
tree.