Filter
Top Products
18
About this Document and the UltraKey Lite
Shipping Checklist
The following is included with your UltraKey Lite Controller shipment. Use of accessories
is dependent on the type of installation. Ultrakey Lite can be connected to the matrix
system either by serial port or Ethernet RJ45 connections.
Table 1-2 Shipping Checklist
Quantity Part Use with...
1 Ultrakey Lite keyboard controller All installations.
1 Ultrakey Lite installation and user
guide
All installations.
1 box Power adapter with plugs for
100-240 VAC, 12 VDC, 50-60 HZ,
1 A, 12 W
Plug adapters depend on local electrical current. Four
models are included:
• CEE 7/16 (Europlug 2.5 A/250V unearthed)
• NEMA 1-15 (North American 15 A/125V ungrounded)
• BS1363 (British 13A /230-240V 50 Hz earthed and
fused)
• CPCS-CCC (Chinese 10 A/250V)/AS 3112 ; Australian
10 A/240V).
1 Connector adapter, RJ45 to DB9
male, for RS422
Backwards compatibility with VideoBloX and
VideoBloX Lite CPU installations. VideoBloX
master port.
2 Connector adapter, RJ45 to DB9
female, for RS232
Backwards compatibility with MAXPRO-Net CPU
installations.
2 RJ45 network cable, 2 meters All installations.
1 RJ45 cross-over Ethernet cable, 2
meters, blue
Used to connect a PC directly to the Controller for web
browser configurations.
1 RJ11 4X6 flat ribbon cable, 2 meters To connect from a MAXPRO and MX18 to the UltraKey Lite.
1 Function key overlay For use with VideoBloX installations.
1 Terminal box For additional device connection requirements.