Filter
Top Products
40
Installing UltraKey Lite with VideoBloX
2. When you are at the Network: Manual Setting menu, press Ent, then press the LCD
up/down arrow keys to set the UltraKeyLite network parameters (IP address, gateway,
netmask and DNS).
3. Press the LCD up/down arrow keys to scroll through the
menu options to select IP Address, then press Ent to
select.
a. Using the numeric key pad, enter an IP address, then
press Ent to save.
The LCD menu displays the message: IPAddr
Changed.
b. Press the up/down arrow keys to select Yes to save or
No to cancel, then press Ent.
Note In this field, you are setting the UltraKey Lite IP address. To set the VideoBloX
IP address (for communication purposes), see Step 3: Set and Configure for
an Ethernet Connection.
4. Press the LCD up/down arrow keys
to scroll through the menu options and select
Gateway. Press Ent.
a. Using the number keys, enter a Gateway as required, then press Ent to save.
The LCD menu displays the message: GW Changed.
b. Press the up/down arrow keys to select Yes to save or No to cancel, then press
Ent.
5. Press the LCD up/down arrow keys to scroll through the menu options and select
NetMask. Press Ent.
a. Using the number keys, enter a NetMask as required, then press Ent to save.
The LCD menu displays the message: NetMsk Changed.
b. Press the up/down arrow keys to select Yes to save or No to cancel, then press
Ent.
6. Press the LCD up/down arrow keys to scroll through the menu options and select
DNS. Press Ent.
a. Using the number keys, enter a DNS as required, then press Ent to save.
The LCD menu displays the message: DNS Changed.
b. Press the up/down arrow keys to select Yes to save or No to cancel, then press
Ent to save.
Network:
IP Address
IP Address
159.099.251.230
IP Addr Changed
Yes