Filter
Top Products
7.2 DOWNLOADING NEW FIRMWARE TO THE HEGS5000, CONTINUED
5. Press . The controller will clear the memory and, when ready to download, will
display the message “Begin Download.” The HEGS5000 is now waiting for data
from the PC.
6. From the START bar on your PC, Select Programs → Ultrak → Ultrak Code Server.
The following window appears.
Figure 9: Ultrak Code Server Window
7. The Port Properties Icon
allows you to select which serial port to use. Clicking
on this Icon open the CommPort Properties window.
Figure 10: CommPort Properties Window
Select the serial port the download adapter is connected to and click OK.
Rev. 1.01 50 900.0800
19-Jun-06