Filter
Top Products
SECTION 2:
INSTALLATION AND EQUIPMENT SETUP
2.1 CONNECTIONS
A terminal block is provided for connection between the HEGS5000 controller and
peripheral equipment. A coiled cable is provided for connection between the
HEGS5000 and the terminal block. Plug one end of the coiled cable into the connector
on the back of the HEGS5000 and the other end into the jack on the terminal block.
Description
Power Supply Connect the power supply, part number 849193-0089,
provided with the unit.
COM1 (RS485 output port) Used for controlling Honeywell KD6/HD6 series domes.
COM2 (RS232 serial port) Used for controlling Honeywell multiplexers and VCRs.
+12VDC
GND
RS-232 (TX) - COM2
RS-232 (RX) - COM2
RS-485 (D+) - COM1
RS-485 (D-) - COM1
Refer to Section 2.2 for installation diagrams for connection to Multiplexers, VCRs, etc.
Rev. 1.01 3 900.0800
19-Jun-06