Filter
Top Products
5.1.1 Camera (KD6/HD6) Selection
To select a camera for control:
1. Enter the camera number (1-256) using the numeric keypad.
2. Press the Camera (
) key.
5.1.2 Manual Control
Table 1. Manual Control
Function Description
Pan/Tilt Use the joystick to control (pan and tilt) the camera. Move the joystick
up and down for tilt functions and left and right for pan functions.
Zoom Rotate the joystick knob clockwise/counterclockwise for zoom in/out
functions.
Iris
Press the Auto Iris (
A
) key to place the lens in auto iris mode
Press the Iris Open (
) key to manually open the lens iris.
Press the Iris Close (
)key to manually close the lens iris.
Focus
Press the Focus Near (
) or Focus Far ( ) keys to manually
focus the lens.
Run Menu (
Run
1. ___
3. ___
)
The Run Menu (
Run
1. ___
3. ___
) key (below the LCD display) is used to control
certain features of the KD6/HD6 PTZ camera. Press Run Menu (
Run
1. ___
3. ___
)
continuously to scroll between available options. When the desired
option is displayed on the controller’s LCD, press Enter (
) to select.
Nightshot – press Enter (
) to toggle on/off. A message
(Nightshot On or Nightshot Off) is displayed on the monitor where
the PTZ video is viewed.
Backlight On/Off – press Enter (
) to toggle on/off. A message
(Backlight Compensation On or Backlight Compensation Off) is
displayed on the monitor where the PTZ video is viewed.
Run Tour – press Enter (
) > then tour # (1-3) > then Enter ( ).
The tour must be programmed for it to run. Refer to section 5.2.9 for
programming tours.
Find Home – Press Enter (
) to send selected KD6/HD6 to home
position.
Quick Prg Preset – Position PTZ of KD6/HD6 > Press Enter (
)>
then Preshot # (000-099)>Press Enter (
). The current scene is
stored with the selected Preshot #.
Log Out – Press Enter (
) to log out; press Menu Esc (
1. ____
2. ____
3. ____
) to
cancel log out
Rev. 1.01 20 900.0800
19-Jun-06