Filter
Top Products
Installation
Installation Preparation
This section contains a general installation procedure and refers to other sections of the
document for detailed instructions. Review this document and the D9412GV4/D7412GV4
Program Entry Guide (P/N: F01U265459) before beginning the installation to determine the
hardware and wiring requirements for the features used. Have the following documentation
available when reading through this guide:
– D9412GV4/D7412GV4 Installation and System Reference Guide (P/N: F01U265457)
– D9412 GV4/D7412GV4 v2.00 Owner’s Manual (P/N: F01U265452)
Enclosure Options
Mount the control panel assembly in any of the Bosch Security Systems, Inc. enclosures listed:
– D8103 Universal Enclosure (tan)
– D8109 Fire Enclosure (red) for the D9412GV4 and D7412GV4 Control Panels
– D8108A Attack Resistant Enclosure (tan)
Refer to the Approved Applications chapter inside the D9412GV4/D7412GV4 v2.00 Installation
and System Reference Guide (P/N: F01U265457) to determine if the application requires a
specific enclosure.
Mounting Enclosure
1. Run the necessary wiring throughout the premises.
2. Mount the enclosure in the desired location. Use all five enclosure mounting holes. Refer
to the diagram for mounting locations and descriptions.
3. Pull the wires into the enclosure.
2
2.1
2.2
2.3
Control Panel Installation | en 5
Bosch Security Systens, Inc. UL Installation Instructions 2012.12 | 02 | F.01U.265.462