Figure 4.2: Non-PowerLimited Wiring
Callout ᅳ Description
1 ᅳ Conduit required for use with external batteries.
2 ᅳ Battery wires
3 ᅳ 0.25 in (6.4 mm) minimum. To ensure proper spacing, use tie-wraps or similar devices to
secure wires.
4 ᅳ Relay output wires
5 ᅳ Input or Zone wires
6 ᅳ Standby battery
Power Outputs - Circuit Protection
5 PTC’s protect the control panel from short circuits on the continuous and programmable
power outputs. The PTC assignments are listed below.
PTC CB2 protects:
– Terminal 3: Auxiliary Power
PTC CB4 protects:
– Terminal 6: Output A (Alarm Power Output)
– Terminal 7: Output B (Alternate Alarm Power Output)
4.3
Control Panel Power Supply and Power Outputs | en 23
Bosch Security Systens, Inc. UL Installation Instructions 2012.12 | 02 | F.01U.265.462