Filter
Top Products
LIST OF ITEMS IN CONNECTION DIAGRAM (Fig. 1)
1. A/C grounded power source, 100–240VAC @ 50/60Hz 1A
2. The Unit’s power connector
3. Power cord with ground (supplied)
4. RJ45 network connector
5. Company network through which remote (VNC or Java) client communicates
with the Unit
6. RJ45 Category 5 network cable
7. PS/2 connector for keyboard 6-pin miniDIN female on server
8. PS/2 connector for mouse 6-pin miniDIN female on server
9. VGA connector for monitor HDDB15 female on server
10. PS/2 connector for keyboard 6-pin miniDIN female on the Unit
11. PS/2 connector for mouse 6-pin miniDIN female on the Unit
12. VGA connector for monitor HDDB15 female on the Unit
13. PS/2 cable for keyboard port 6-pin miniDIN male/male
14. PS/2 cable for mouse port 6-pin miniDIN male/male
15. VGA cable for monitor port HDDB15 male/male with thumbscrews
16. PS/2 connector for keyboard 6-pin miniDIN female on the Unit for local
console keyboard
17. PS/2 connector for mouse 6-pin miniDIN female on the Unit for local
console mouse
18. VGA connector for monitor HDDB15 female on the Unit for local
console monitor
19. Local Console Keyboard
20. Local Console Mouse
21. Local Console Monitor
22. Serial port 2—used for power control (relay module) or secondary serial port
23. Reset button—use a paperclip (or similar) to reset hardware of the Unit; will not
affect controlled computer
24. Primary serial port—RS232C DCE connection; connect using a male/female, 9-
pin, straight-through cable to any computer
25. 10/100 speed light: Green—100Base-T connection; Orange—10Base-T
26. Link/Activity Light—“On” indicates good link connection, “Off” indicates no link,
“blinking” indicates is that there is network traffic
27. Red and green indicator lights that should alternate when the unit is well
CONNECTION DIAGRAM
6
P74045-B-F1DE101N-man.qxd 5/21/02 4:11 PM Page 6