Filter
Top Products
26
BROWSER CONFIGURATION
Network Setup
On this screen, you can configure the network details for the Unit (Fig. 25).
Fig. 25
Note: When you make changes to any of the above, your changes will take effect after
the next reset or power cycle. If you want the new values to be in effect immediately,
click on the button “Commit IP config changes” below. Since the web page you are
currently reading was at the old network address, you may get an error after pressing
this button and your browser will probably take a long time to time out. This is to be
expected if you are changing the IP address or other details to new values.
Changing the Machine Name
This simple text string identifies this machine. To change the machine name, type in a
new name up to 15 characters long.
Accessing the Ethernet Address (MAC Address)
This is the hardware address of the Ethernet interface on the Unit. It is assigned by the
factory to uniquely identify this Unit and it cannot be changed. You may need this
number to configure other software on your network, such as DHCP servers, hubs, or
monitoring software.
USERS
Changing the Master Account Password
The master (or root) password can be changed here. The user name for the master
account cannot be changed. The system will accept either “root” or “administrator” as
the name of this account.
Defining User Names and Passwords for User Accounts
Here you may define user names and passwords for up to five regular users. You must
enable the account in order to permit logins.
P74045-B-F1DE101N-man.qxd 5/21/02 4:11 PM Page 26