Filter
Top Products
NETWORK SETUP
14
Call up the main menu by hitting the appropriate hot key combination (the default is
“Print Screen” + “Print Screen”).
Fig. 12
Select “Network Configuration” to view the following menu:
Fig. 13
NETWORK CONFIGURATION MENU
1. Addressing and Routing
From this screen, you can configure the network details for the Unit.
Note: When you make changes to any of the above, your changes will take effect after
the next reset or power cycle. If you want the new values to be in effect immediately,
select “Commit IP config changes”.
2. Changing the Machine Name
This simple text string identifies this machine. To change the machine name, type in
a new name up to 15 characters long.
3. Accessing the Ethernet Address (MAC Address)
This is the hardware address of the Ethernet interface on the Unit. It is assigned by
the factory to uniquely identify this Unit and it cannot be changed. You may need
this number to configure other software on your network, such as DHCP servers,
hubs, or monitoring software.
Network Configuration
IP address: 192.165.1.77
Subnet mask:
Default Gateway: 192.165.1.1
> Commit IP config changes
Machine name: server 1
MAC address: 00:01:b2:80:00:07
Main Menu
O Network Configuration
O Monitoring Settings
O Security Settings
O Serial port (RS-232) config
O Local user control
O Virtual Network Computer
O Version Information
P74045-B-F1DE101N-man.qxd 5/21/02 4:11 PM Page 14