Filter
Top Products
HARDWARE INSTALLATION (CONTINUED)
CONNECTING THE KVM SWITCH TO
THE UNIT
Using the provided PS/2 KVM Cable Kit,
connect one end of the VGA and PS/2
cables to the Console ports on the KVM
switch. Connect the other end to the
“CPU/KVM” ports on the back of the
Unit (Fig. 5).
Fig. 5
CONNECTING THE UNIT TO THE
NETWORK
Connect the Unit to the network using
RJ45 Category 5 network cable (Fig. 6).
Fig.6
POWERING UP THE UNIT
Attach the IEC power cable to the power
connector located on the rear of the
Unit (Fig. 7).
CPU/
KVM
Console
Reset
Serial 02
Serial 01
Network
console
USB
flash
bank
select
reset
PS/2
daisy chain OUT
daisy chain IN
CPU 01/02 CPU 03/04 CPU 05/06 CPU 07/08
90-264 VAC. 47-63 Hz
1 2 3 4
CPU/
KVM
Console
Reset
Serial 02
Serial 01
Network
CPU/
KVM
Console
Reset
Serial 02
Serial 01
Network
11
Fig. 7
Fig. 5
Fig. 6
P74045-B-F1DE101N-man.qxd 5/21/02 4:11 PM Page 11