94 105SL User Guide 6/4/2004 11342L Rev. 8
Specifications
Printing Specifications
Printing Specifications
Printing Specifications 105SL
Resolution 203 dots/inch (8 dots/mm)/
300 dots/inch (12 dots/mm)
Dot size (width × length) 0.0049 in. × 0.0049 in. (0.125 mm × 0.125 mm)/
0.0033 in. × 0.0039 in. (0.084 mm × 0.10 mm)
First dot location measured from inside media edge 0.10 in. ± 0.035 in. (2.5 mm ± 0.89 mm)
Maximum print width 4.49 in. (114 mm)
Print Length
(maximum)
Continuous printing 203 dpi 90 in. (2286 mm)
300 dpi 41 in. (10 41 mm)
Media registrati on tolerat io n*
(non-contin uo us medi a)
Vertical = ≤ ±0.050 in. (1.3 mm)
Horizontal = ≤ ±0.050 in. (1.3 mm)
Programmable print speeds 203 dpi 2.4 in. (61 mm) through 8.0 in. (203 mm)
per second in 1 in. (25.4 mm) increments
300 dpi 2.4 in. (61 mm) through 8.0 in. (203 mm)
per second in 1 in. (25.4 mm) increments
Bar code
modulus (“X”)
dimension
Ladder (rotated)
orientation
203 dpi 4.9 mil t o 49 mil
300 dpi 3.9 mil t o 39 mil
Picket fenc e
(nonrotated)
orientation
203 dpi 4.9 mil t o 49 mil
300 dpi 3.3 mil t o 33 mil
Thin film printhead with Element Energy Equalizer (E
3
)
®
Yes
* Media registration and minimum label length are affected by media type and width, ribbon type, and print
speed. Performance improves as these factors are optimized. Zebra recommends always qualifying any
application with thorough testing.
