A SERVICE OF

logo

Open as PDF
next previous
86 105SL User Guide 6/4/2004 11342L Rev. 8
Troubleshooting
Printer Diagnostics
CANCEL Self Test
The CANCEL self test prints a configurat ion lab el, wh ich tel ls you th e curre nt setti ngs for the
printer.
The configuration may be changed either temporarily (for specific label formats or ribbon and
label stock) or permanentl y (by saving the new parameters in memory). Saving new
parameters occurs whenever a calibration procedure is performed. Refer to Basic Printer
Configuration on page 45 for further information about the configuration procedure.
Additional Power-Up Self Tests are also performed during the POST for this test.
To perform the CANCEL Self Test, complete these steps:
1. Turn Off (O) the printe r.
2. Press and hold CANCEL while turning the power On (I). Hold CANCEL until the DATA
light turns off.
A printer configuration label prints (Figure 46).
Figure 46 • Configuration Label