Troubleshooting Your Workstation
Using The HP Setup Program
Chapter 7
179
Using The HP Setup Program
The Setup program allows you to view and change the configuration of your workstation,
such as the passwords and boot device order. Follow these instructions to check the
configuration.
First, Turn On Or Restart Your Workstation
If your workstation is off, turn on the display and then the workstation.
If the workstation is already turned on, save your data, exit all programs and restart
your workstation. For Windows operating systems, use the Shut Down > Restart your
computer
command in the Start menu. This command will automatically exit the
operating system and restart the workstation.
To Go To The Setup Program
To go into the Setup program, press F2 while the HP logo appears on your display.
