3-89
Printing with Epson Drivers for Macintosh | 89
2. Select the correct settings to match your ICC profile. These settings
override any paper configuration settings you may have made using the
printer’s control panel.
• Color Density lets you control the ink saturation level.
• Drying Time per Print Head Pass lets you print with non-Epson
media and avoid smearing the ink. You can make the print head
wait up to 5 seconds after each pass to allow ink to dry on the page.
• Paper Feed Adjustment helps reduce banding. Choose a lower
value if you see white lines on your prints, or a higher value if you
see dark lines.
• Paper Thickness helps reduce vertical banding and creates a
sharper image when printing on unusually thick or thin paper.
• Paper Suction lets you decrease the paper suction level when
printing on thinner papers (less than 12 lb), such as CAD drafting
paper.
• Cut Method decreases the cutting blade pressure for thinner media,
or adjusts the speed for thick media. You may need to experiment to
determine the best setting for your paper.
• Platen Gap lets you fine-tune the setting for various paper
thicknesses.
