A SERVICE OF

logo

Open as PDF
next previous
5-136
136 | Maintaining and Transporting the Printer
6. Hold the cartridge with the arrow pointing toward the printer. Then
insert the cartridge into the slot until it clicks in place. Don’t force it in.
7. Close the ink cover.
Once the cartridge is installed, the printer returns to its
READY state.
Changing the Date and Time
1. Press r Menu.
2. Press d until
MAINTENANCE is selected, then press r.
3. Press d until you see
CLOCK SETTING, then press r.
4. Use the d, u, and r buttons to set each item in the date and time,
displayed in the following format:
MM/DD/YY HH:MM.
Caution: Do not touch
the green chip on the
side of the cartridge.
Doing so may prevent
normal operation and
printing. Do not touch the
black parts inside the ink
bay.
Caution: Do not remove
and re-insert cartridges
more often than
necessary. Doing so can
compromise the needle
valve seal and allow air to
enter the ink tubes,
causing nozzle loss.