Filter
Top Products
5
Setup the Handset(s)
Install the battery
Unpack all handsets, battery packs, 1.
and battery covers. If any handset has
the battery cover already attached,
press in on the notch and slide the
cover down and off.
Line up the battery pack connector 2.
with the jack inside the handset. (The
battery connector will only fit one way.)
Push the battery pack connector in 3.
until it clicks into place. Tug gently on
the wires to make sure the battery
pack is securely connected.
Place the cover over the 4.
battery compartment and slide it up
into place.
Charge the battery
Place one handset in the base and any other handsets in a charger
with the displays facing forward. (It doesn't matter which handset you
place in the base.) The
CHARGE
lights on the base and all chargers
should turn on.