Filter
Top Products
36
Using Special Features
Using Do Not Disturb
The
Do Not Disturb or DND feature turns off the ringers of the
base and all handsets at the same time.
With the phone in standby, press and hold
DO NOT DISTURB
on the
base. The phone automatically turns on the answering system and
shows
Do Not Disturb
in the display on all stations.
To cancel, press
DO NOT DISTURB
again.
If you turn the answering system off while DND is on, the phone turns
off DND along with the answering system.
Using Call Block
If you subscribe to Caller ID, you can block incoming calls by adding
numbers to the call block list.
When either line receives a call, the phone compares the received
phone number to the numbers on the call block list. If the phone
number is on the list, the phone replaces the caller's name with
Call Blocked
and disconnects the call. (The caller hears a reject
message.)
The call block list holds 20 entries; this list applies to all stations
and both lines.
You can add a number to the call block list through the CID list
options (select
Add Call Block
), or through the
Call Blocking
menu
(select
New Entry
).
Only one station can edit the call block list at a time.