Filter
Top Products
46
If… Try…
No stations will
display any Caller ID
information.
Letting calls ring at least twice before answering. -
Seeing if the call was placed through a switchboard. -
Checking with your telephone service provider to -
make sure your Caller ID service is active.
Caller ID displays
briefly and then
clears.
You may have to change the line mode. Contact -
customer service for more information.
I can’t transfer calls.
Resetting all the handsets (see page - 49).
I can’t get two
cordless handsets to
talk to the caller.
Making sure both handsets are registered to this -
base.
Making sure no station is in Privacy Mode (see page -
30).
The phone keeps
ringing if I answer
on an extension.
You may have to change the line mode. Contact -
customer service for more information.
I can't save a number
to an existing
phonebook entry.
Seeing if the number is already in the phonebook. -
Seeing if that entry already has two phone numbers. -
The answering
system does not
work.
Making sure the answering system is turned on. -
Making sure the base AC adapter is not plugged into -
an that's controlled by a wall switch.
The answering
system won't record
messages.
Making sure the -
Record Time
is not set to
Announce Only
(see page 41).
Deleting messages (the memory may be full). -
A handset can't
access the
answering system.
Making sure no other handset is using the system. -
Making sure the phone is in standby. -
My outgoing
message is gone.
Seeing if there was a power failure. You may have to -
re-record your personal outgoing message.
I can’t hear the base
speaker.
Making sure call screening is turned on -
(see page
41).
Changing the base speaker volume. -