Filter
Top Products
Cleaning and maintaining the headset system
32
Cleaning and maintaining the
headset system
Damage to the product due to liquids!
Liquids entering the product can short-circuit the electronics
or damage the me
chanics.
Solvents or cleansing agents can dama
ge the surface of the
product.
̈ Keep all liquids far away from the product.
̈ Do not use any solvents or cleansing agents
.
̈ Before cleaning, switch the product off and disconnect the base station
from the mains.
̈ Only use a dry and soft cloth to clean the product.
̈ Clean the charging contacts · of the base station and the charging
contacts ቫ of the headset from time to time using e.g. a cotton swab.
·
0
Replacing the ear pad(s)
You can replace the ear pad(s). Spare ear pads are available from your
Sennheiser partner.
̈ Carefully remove the old ear pad ቪ.
̈ Attach the new ear pad to the ear cup by pressing
firmly around the ear
pad until you hear it lock into place.
9
CAUTION