Filter
Top Products
17
Putting the headset system into operation
̈ Push the AUDIO button ቧ in the direction in which you want to
increase the volume until the HEADSET LED ብ goes off.
The headset switches to standby mode.
Left
Right
5 s
5
4
6
Testing the headset system in Phone mode and
adjusting it
Testing the telephone connection
When PC mode is selected (the LED of the PC button
³ lights up white):
̈ Press the PHONE button
» on the base station.
The base station is set to Phone mod
e and the LED of the PHONE
button
» lights up white.
̈ Press either the LINK button ቦ on the headset or the PHONE button
» on the base station.
A wireless link is established between the headset and
the base
station, the LINK LED ¿ lights up blue and the HEADSET LED ብ flashes
blue.
»
5
4
¿
̈ Lift the handset (If a handset lifter is connected, it automatically lifts
the handset).
The system is correctly connected if you
can hear a clear dial tone and
if the other party can hear you at a comfortable level.
If the audio signal/dial tone is disturbed, adjust the audio signal (see
page
18). If the other party cannot hear you well, adjust the micro-
phone sensitivity (see page 18).