Filter
Top Products
Using the headset system
30
The volumes can be adjusted in several steps. When the minimum or
maximum volume is reached, you hear a double beep in the headset.
Vol –
Vol +
6
̈ To increase or reduce the volume step-by-step, push the AUDIO
button ቧ backwards or forwards.
The assignment of the AUDIO button ቧ can be swapped depending
on whether you wear the headset on the right or left ear (see
“Swappi
ng the assignment of the AUDIO button ቧ” on page 16).
Muting the headset’s microphone
¿
MUTE Mic
6
To mute the headset’s microphone during a call (the LINK LED ¿ on the
base station lights up blue):
̈ Press the AUDIO button ቧ.
The microphone is muted. While the microphone is muted, you hear a
beep
in the headset every 5 seconds and the LINK LED ¿ on the base
station flashes red.
To unmute the headset’s microphone:
̈ Press the AUDIO button ቧ again.
You hear a low confirmation beep in the headset.
or
̈ Disconnect the wireless link between headset a
nd base station (see
page 23).
In both cases, the muting is canceled and the LINK LED ¿ lights up blue
again or goes off.
Using the advanced functions
Pairing additional headsets for shared use
You can use one DW series base st
ation with different DW series
*
head-
sets. This can be advantageous if you share a telephon
e workplace. The
last headset paired to the base station can be used without more ado.
If no wireless link is established betw
een headset and base station:
̈ Place the additional headset into the magnetic holder of the base
sta
tion.
During pairing of the headset to the base station, the HEADSET LED ብ
flashes blue/red. If pairing was successful, the HEADSET LED ብ lights
up blue. You can now use the newly paired headset.
* The DW series comprises the following products: DW Office, DW Office USB, DW Pro1/
Pro2, DW Pro1/Pro2 USB. The DW 800 is not part of the DW series.