Filter
Top Products
Using the headset system
22
Using the headset system
Charging the headset rechargeable battery
If you charge the rechargeable battery for the first time, allow charging for
at least 20 minutes without interruption. A complete charging process
takes about 60 minutes. You can interrupt charging at any time without
da
maging the rechargeable battery.
Operating time with a fully charged rechargeable battery:
Talk time/standby time Mode
12 hours narrowband mode (see page 21)
8 hours wideband mode (see page 21)
4 days standby mode
To charge the rechargeable battery of the Pro1/Pro2 headset:
̈ Place the headset into the magnetic hold
er of the base station.
The HEADSET LED ብ lights up blue and the CHARGE STATUS LED ´
indicates the battery charge:
LED segment* Battery charge Required charging time
1 0-25% approx. 10 min
2 25-50% approx. 10 min
3 50-75% approx. 20 min
4 75-100% approx. 20 min
* during charging, each segment gets brighter in 5 steps
After completion of the charging process, the HEADSET LED ብ goes off.
Pro1 Pro2
´
4
To stop the charging process:
̈ Take the headset out of the base station.
The CHARGE STATUS LED ´ indicates the remaining battery charge of
the headset.
total:
approx.
60 min