Filter
Top Products
Putting the headset system into operation
16
Putting the headset into operation
The microphone boom of the Pro1/Pro2 headset can be swiveled, allowing
the microphone to be worn on the left or right-hand side (see page 24).
20 min
100%
50%
1 h
Before using the headset for the first time, charge the rechargeable
battery for at least 20 minutes (see page 22).
Labeling the headset
The name plate ቤ allows you to label the headset.
̈ Change the lettering of the name plate as shown.
The “Nameplate-template.pdf” PDF f
i
le included on the CD ROM
allows you to create and print individual name plates.
3
3
Swapping the assignment of the AUDIO button ቧ
The assignment of the AUDIO button ቧ can be swapped depending on
whether you wear the headset on the right or left ear. By default, the
he
adset is configured for wearing on the right ear. Pushing the AUDIO
button ቧ backwards increases the volume, pushing it forwards reduces
the volume (see page 29).
To swap the assignment of the AUDIO button ቧ:
̈ Simultaneously press and hold the headset’s LINK but
ton ቦ and
AUDIO button ቧ for 5 seconds.
The HEADSET LED ብ flashes blue/red.