Filter
Top Products
COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
23 MEGATOUCH EVO ION OWNER’S MANUAL PM0426-13
DIP SWITCH SETTINGS
The following table provides information on the functionality of the hard DIP switches in
Megatouch games. Make sure to read the information in the Notes column to determine
what is affected when performing these functions. After performing any DIP switch
function, make sure to follow the instructions on the screen. In most cases, you will be
instructed to reset the DIP switch in order to reboot the game. If you fail to reset the DIP
switch before rebooting, it could result in corruption of the hard drive.
NOTE: The DIP switch functionality is built into the software. To access the DIP switches
through the software: Turn off the game. Set DIP switch 1 to the closed position. Turn
power on. When the message Please reset DIP 1 to proceed appears, reset DIP 1 to
the open position. The Merit diagnostics page will appear. Touch ? for information on DIP
switch functionality. Touch the specific DIP switch to activate it. Touch X to exit.
ION 2006, FORCE 2003 / MAXX Ruby and greater
DIP# Function Usage/Notes
8 Motherboard
configuration &
checksum test
•
Configures the CMOS settings on the motherboard to Merit
specifications and checks the files on the hard drive.
A checksum test should be performed when the game is locking
up or rebooting. If the test fails, the program should be reloaded
onto the hard drive. After reloading, perform another checksum
test. If it fails again, the hard drive should be replaced.
6 Hardware
configuration
• Identifies system hardware and configures the motherboard.
A hardware configuration occasionally needs to be performed
after a kit is installed and the touchscreen is not responding to
touch or the calibration is off.
5 & 7 Memory clear for
TournaMAXX™
and
TouchTunes®
• Clears the login name, password, access phone number, and
all call-in settings for TournaMAXX users.
•
Clears all the loaded albums for TouchTunes users.
•
Clears current books, coin-in, high scores and resets the
software options.
A memory clear should be performed when a game is not able to
connect to TournaMAXX and there is some question about the
information in the Dial-Up Network Screen being correct. After
performing a memory clear, TournaMAXX setup information must
be re-entered, and an Update From Server should be
performed.
NOTE: TournaMAXX games must perform an Update From
Server BEFORE performing a memory clear.
4 & 7 Complete
memory clear
•
Clears ALL memory on hard drive including the TournaMAXX
player database, TournaMAXX settings, advertising screens,
bookkeeping, high scores, coin-in, options, etc. It resets the
game to the factory defaults. It also marks bad sectors on hard
drive.
A complete memory clear should only be performed when the
game is locking up or resetting and it has passed the checksum
test. After performing a memory clear, the player database
should be reloaded, TournaMAXX setup information must be re-
entered, and an Update From Server should be performed.
NOTE: TournaMAXX games must perform an Update From
Server BEFORE performing a complete memory clear.
3 Watchdog Timer
(EVO, Elite
Edge, Wallette
and Fusion
games)
• When the watchdog timer is enabled, it will reboot the machine
within 2 minutes of a failure, allowing the game to
automatically reset itself if a problem arises.