Ruby Tech PM0426-13 Video Game Console User Manual


 
COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
Diagnostics Menu
FIGURE 15 - DIAGNOSTICS MENU
Video Test
Touch the screen to cycle through a series of video test screens.
I/O Test
Tests the SETUP and CALIBRATE buttons, all coin channels, the
coin meter, and the coin lockout feature (if applicable). A green
light next to the appropriate button will register each time that item
is tested, and the number next to the item should increment by one
with each test. The screen also displays which DIP switches are
on or off.
Touchscreen
Calibration
Follow the on-screen instructions to calibrate the touchscreen.
Touchscreen Test
Allows you to check the touchscreen calibration accuracy. The
crosshairs should follow your finger exactly when you move it
across the screen.
View System Log
Displays a log of all operations performed by the game since the
log was last cleared. This information is helpful for customer
service in troubleshooting your game.
Checksum Test
Checks the hard drive for missing or corrupted files. With STOP
ON ERROR? set to YES, a message indicating which file is
corrupted will be shown whenever the game encounters an error.
With STOP ON ERROR? set to NO, a list of corrupted files will be
displayed when the test is complete. If errors are detected, the
software on the drive may need to be reloaded. If this does not
solve the problem, the drive may require replacement. The test
could take up to 30 minutes.
System Info
Gives details about the following:
processor type and speed
motherboard manufacturer
amount of memory
Ethernet card manufacturer
sound chip type
video chip type
touchscreen manufacturer
hard drive manufacturer
and capacity
modem part
identification number
fan speed
status
Verifying Databases
Only use on the advice of Merit Technical Service. An
Update
from Server
must be performed prior to verifying databases.
Joystick Calibration
(ION only)
Follow the on-screen instructions to calibrate the joystick.
Joystick Test
(ION only)
Allows you to check the joystick calibration accuracy. The
crosshairs should follow the movement of the joystick.
PM0426-13 MEGATOUCH EVO ION OWNER’S MANUAL 18