Filter
Top Products
– iv –
Important Information for Users
Important Information for Users
It is important that motion control equipment is installed and operated in such a way
that all applicable safety requirements are met. It is your responsibility as an installer
to ensure that you identify the relevant safety standards and comply with them; failure
to do so may result in damage to equipment and personal injury. In particular, you
should study the contents of this user guide carefully before installing or operating the
equipment.
The installation, set up, test, and maintenance procedures given in this User Guide
should only be carried out by competent personnel trained in the installation of
electronic equipment. Such personnel should be aware of the potential electrical and
mechanical hazards associated with mains-powered motion control equipment—
please see the safety warnings below. The individual or group having overall
responsibility for this equipment must ensure that operators are adequately trained.
Under no circumstances will the suppliers of the equipment be liable for any
incidental, consequential or special damages of any kind whatsoever, including but
not limited to lost profits arising from or in any way connected with the use of the
equipment or this guide.
Safety Warning!
High-performance motion control equipment is capable of producing rapid
movement and very high forces. Unexpected motion may occur especially during
the development of controller programs. KEEP WELL CLEAR of any machinery
driven by stepper or servo motors. Never touch any part of the equipment while it is
in operation.
This product is sold as a motion control component to be installed in a complete
system using good engineering practice. Care must be taken to ensure that the
product is installed and used in a safe manner according to local safety laws and
regulations. In particular, the product must be positioned such that no part is
accessible while power may be applied.
This and other information from Parker Hannifin Corporation, its subsidiaries, and
authorized distributors provides product or system options for further investigation
by users having technical expertise. Before you select or use any product or
system, it is important that you analyze all aspects of your application and review
the information concerning the product in the current product catalog. The user,
through its own analysis and testing, is solely responsible for making the final
selection of the system and components and assuring that all performance, safety,
and warning requirements of the application are met.
If the equipment is used in any manner that does not conform to the instructions
given in this user guide, then the protection provided by the equipment may be
impaired.
The information in this user guide, including any apparatus, methods, techniques, and
concepts described herein, are the proprietary property of Parker Hannifin or its
licensors, and may not be copied disclosed, or used for any purpose not expressly
authorized by the owner thereof.
Since Parker Hannifin constantly strives to improve all of its products, we reserve the
right to modify equipment and user guides without prior notice. No part of this user
guide may be reproduced in any form without the prior consent of Parker Hannifin.