Filter
Top Products
– 16 – ACRCOMM and ACREXPAXIS User’s Guide
XP10 Connector
The XP10 connector provides +5 VDC TTL I/O for INTCAP and other special
functions. For connector locations, see Figure 3 on page 11.
Voltage ....................................................+5 VDC
Current Rating.........................................0.100A maximum
XP10 Pinout
Definition Pin Definition Pin
EXP_IN0 1 EXP_IN1 2
EXP_IN2 3 EXP_IN3 4
EXP_IN4 5 EXP_IN5 6
EXP_IN6 7 EXP_IN7 8
EXP_OUT0 9 EXP_OUT1 10
RESERVED 11 RESERVED 12
RESERVED 13 RESERVED 14
Table 12 EXPAXIS XP10 Connector Pinout
F1 Fuse
When replacing fuses for the EXPAXIS module, use the following tables to
determine the correct part numbers for different vendors.
For fuse location, see Figure 3 on page 11.
Voltage ....................................................+5 VDC
Current Rating.........................................0.250A
Type ........................................................ Littelfuse 454.500
Time Delay Fuse
Hardware Wiring
Analog I/O—XP2
The Analog I/O connections on the EXPAXIS module is a 40 Pin Header. To
convert the XP2 connector (EXPAXIS module) for use with the P2 connector
(ACR1505), use the DXP2 cable assembly (part number PWH80500)
supplied with the EXPAXIS module.