Filter
Top Products
15
DC-1 Digital Controller
Installation and
Calibration
Connecting the
DC-1 as a preamp
Input sources can each be connected directly to the DC-1 inputs. A typical
system might use the TV, VCR1, V-DISC and CD and TUNER (output
through a preamp). Since TAPE, TUNER and CD are audio only, the video
output will default to the video signal fromVCR 1. This feature allows TV
or other video source viewing while different audio is playing, but can be
defeated in the Setup menu.
Connect your main stereo amplifier to the DC-1 FRONT outputs. Connect
any additional amplifier/speaker combinations to the remaining outputs
on the DC-1: side amplifiers to the SIDE outputs, rear amplifiers to the
REAR outputs, center-channel amplifier to the CENTER output and the
subwoofer amp to the SUBWOOFER output. If you are using THX-type
dipolar surround speakers, the amplifier driving them should be connected
to the DC-1 SIDE outputs.