Filter
Top Products
Lexicon
12
Installation and
Calibration
Remote Control
ACCY Functions
Press and hold ACCY, then press DONE to activate a "You Are Here" mode which:
• Disables mute
• Sets volume to -30dB; sets Zone 2 volume to -20dB
• Centers Balance controls
• Loads the Pro Logic Effect
• Selects the VCR1 input; does not affect the Rec/Zone 2 input
• Activates On-Screen display with 2 second timeout
• Sets Remote Trigger ON
• Sets all tone controls to 0dB or OFF
To assign an effect to the input buttons, the original assignment must be
cleared with the following procedure. Press and hold ACCY, then press
BYPASS. Press the input button. The display should show EFFECT AS-
SIGNMENT CLEARED.
Assign the effect to the input button by scrolling to the desired effect,
pressing and holding ACCY, then pressing the input button.