Honeywell wt6500 Video Gaming Accessories User Manual


  Open as PDF
of 46
 
35
Operation
SMARTBOX™ Controller for HONEYWELL™ Wind Turbine WT6500 Owner’s Manual - Rev14
Battery Setup Menu
RISK OF FIRE OR EXPLOSION
These settings must be followed correctly. Setting them
incorrectlywillhighlyincreasetheriskofreand/orbattery
explosion. Failure to follow this warning may result in death,
personal injury or property damage.
..BATTERY SETUP
...TYPE ?
..BATTERY SETUP
...AHr ?
..BATTERY SETUP
...BANKS ?
UP/DWN
UP/DWN
UP/DWN
..BATTERY SETUP
...RECHARGE VOLTAGE ?
UP/DWN
ENTER/BACK
ENTER/BACK
ENTER/BACK
ENTER/BACK
..BATTERY SETUP
Type=FLOODED
..BATTERY SETUP
AHr=100
..BATTERY SETUP
Banks=1
..BATTERY SETUP
Voltage=23.0
..BATTERY SETUP
...RE-COMMISSION ?
UP/DWN
ENTER/BACK
..BATTERY SETUP
UP/HOLD=CLEAR
1
2
3
4
5
Figure 4.8 Battery Setup Menu
1. Battery Type. Use the up and down keys to select the type of batteries you have.
Choose from FLOODED, GEL and AMG. Press Enter to save, Back to cancel.
2. Ahr. Use the up and down keys to select the Amp-Hours of your batteries. Press
Enter to save, Back to cancel.
3. Banks. Use the up and down keys to select the number of battery banks you have.
Press Enter to save, Back to cancel.
4. Recharge Voltage. The recharge voltage is the battery voltage at which point the
inverterwillshutoff.Thechargesystemwillleavetheoatstateandreturntobulk
charge to restart the charger cycle.
5. Re-Commission. To start the commissions process over hold down the up key. This
isnecessaryiftheturbinehasmovedandneedstoberecongured.
 previous next