Filter
Top Products
10
SMARTBOX™ Controller for HONEYWELL™ Wind Turbine WT6500 Owner’s Manual - Rev14
SMARTBOX Installation
Minimum Clearance for Proper Mounting
allow for at least 150 mm
(6 in) clearance.
allow for at least 150 mm
(6 in) clearance.
allow for at least
300 mm (12 in)
clearance.
allow for at least
300 mm (12 in)
clearance.
allow for at least
508 mm (20 in)
clearance.
Figure 2.3 Minimum Clearance for Proper Mounting
EQUIPMENT DAMAGE
Never install the SMARTBOX™ Controller where it is
exposed to salt water spray. Exposure to salt water will void
the warranty and may cause a shock hazard.
EXPLOSION/CORROSION DAMAGE
Toreducetheriskofcorrosionfromhydrogen-sulde
gas vented by batteries, do not install the SMARTBOX™
Controller in sealed compartments containing batteries.
Failure to follow this warning may result in death, personal
injury or property damage.