Filter
Top Products
8494/95/96G/H Operating And Service Manual 15
Replaceable Parts
Replaceable Parts
Table 5 lists the replaceable parts which are the only parts that can be
replaced without access to the interior of the instrument. If any parts not
listed below need replacement, return the instrument to Agilent
Technologies.
To order a part listed in the replaceable parts table below, quote the part
number, indicate the quantity required, and address the order to the nearest
Agilent Technologies office.
CAUTION Due to special fixtures necessary for assembly, do not attempt to replace any
parts not listed in the table below. If the instrument is opened, the warranty is
void.
Table 5 Replaceable Parts
Description Part Number
Option 003 7-mm center conductor contact 1250-0907
Option 003 7-mm connector outer shell assembly 1250-0909
Option 001 type-N female connector outer shell 1250-0914
Screws for both bases: 4-40 x 7/8 in. Fillister head 2220-0006
Cable, solenoid drive, 1.52 m (5 ft) long, connector plug on
one end and other end unterminated
8120-2178
Base for 8495G/H 5041-3887
Base for 8494G/H and 8496G/H 5041-3888
Connector plug and contacts only without cable TKP12-12-102P-TS-100-AU
1
1. Available from distributors of Viking Industries, Inc., Chatsworth CA 91311
Contact insertion/extraction tool TIE-200
1