Filter
Top Products
8494/95/96G/H Operating And Service Manual 5
Overview
Figure 2 Typical Solenoid Coil Driver Circuits
CAUTION Do not exceed the RF power rating of 1 W average or 100 W peak with a
maximum pulse width of 10
µs. Do not connect an attenuator RF input or
output connector to greater the ±7 Vdc. If the attenuator must be connected
to a device with a potential greater than ±7 Vdc, use a blocking capacitor.
Instrument Options Each instrument is specified with an option number which denotes the
configuration of the input and output connectors.
Option Connector Description
001 Both connectors type-N female
002 Both connectors SMA female
003
1
1. Option 003 is not available on the 8495G.
Both connectors 7 mm