Filter
Top Products
Known Problems 23
WebView Issues
Unless otherwise noted, the workaround for Web-
View issues is to use the CLI or 3WXM.
WebView does not display more than 32 service
profiles. (18374)
WebView allows configuration of duplicate SSID
names in the same service profile. (18375)
In WebView, self-signed certificate for network
user is not accepted with only a Common Name
value. (15651)
If you use WebView to configure a self-signed certifi-
cate for network users, the switch does not generate
the certificate if you enter information only in the
Common Name field and not in other fields.
This issue does not affect the CLI. In the CLI, you can
generate a self-signed certificate with only the
common name specified. Use the CLI to generate the
certificate or use the additional fields in WebView.
If you are running Linux Redhat 9 and use
Firefox 2.0 to open WebView, the browser may
become unresponsive. (40676)
This behavior is noted on the WX2200 and WX4400.
AAA and RADIUS Issues
Default 802.1X retransmit interval is too short
for manual login. (18032)
The default 802.1X retransmit interval is 5 seconds.
Although this interval is adequate for clients that are
configured to automatically use the user’s Windows
login information as the network login information,
the interval is too short for users who must manually
enter their network login information.
If the network has clients that do not automatically
use the Windows username and password as the net-
work username and password, use the set dot1x
tx-period command to increase the retransmit time.
CAUTION: Changes to 802.1X parameters affect all
SSIDs managed by the WX switch.
Deleting a user group or MAC user group does
not delete membership from its members.
(14833)
If you type the clear usergroup or clear mac-user-
group command to delete a user group or MAC user
group, the display aaa command shows that the
user group is gone. However, the user profiles for the
users still list them as members of the deleted groups.
Use the clear user group and clear mac-user group
commands in addition to the clear usergroup and
clear mac-usergroup commands to explicitly remove
individual users or MAC users from a group.
CLI allows set authentication dot1x command
with invalid combination of pass-through and
local options. (15562)
The CLI allows you to enter a command such as the
following:
set authentication dot1x ssid any * pass-through
local