Filter
Top Products
18 WIRELESS LAN SWITCH AND CONTROLLER MSS VERSION 6.0.4.6 RELEASE NOTES
Rogue Detection Active Scan Interval Is Longer
During a SpectraLink SVP Call. (23317)
The active scan feature can be used during SVP calls.
However, when a call is active, the interval at which
active scan goes off-channel to look for rogues in-
creases from once a second to once every 60 seconds.
Due to the longer interval between active scans, it can
take longer for MSS to detect a rogue AP when an
SVP call is active. Generally, detection of a rogue
while a call is active can take from 3.5 to around 7.5
minutes. To reduce the detection time, add more
MAPs to the coverage area.
Active Scanning and the AP3850
Active Scanning is not supported and must not be
used with the AP3850 for the following countries:
IPv6 Support
MSS 6.0 can forward IPv6 traffic transparently, at
Layer 2. IPv6 clients in the same subnet can communi-
cate with one another through a WX switch. How-
ever, MSS 6.0 does not support communication of
IPv6 clients across subnets.
System Parameter Support
The following tables list the recommended or maxi-
mum supported values for major system parameters.
Argentina (AR)
Australia (AU)
Bolivia (BO)
Brazil (BR)
Canada (CA)
China (CN)
Colombia (CO)
Dominican Republic (DO)
Guatemala (GT)
Hong Kong (HK)
Malaysia (MY)
Mexico (MX)
New Zealand (NZ)
Panama (PA)
Puerto Rico (PR)
Singapore (SG)
South Africa (ZA)
Taiwan (TW)
United States (US)
Uruguay (UY)
Mobility System Parameter Supported Value
WX switches in a single Network
Domain
500
WX switches in a single Mobility
Domain
32
Roaming VLANs per WX switch 300
Does not include local statically config-
ured VLANs
VLANs per Mobility Domain 400
This number consists of 300 roaming
VLANs plus 100 local statically config-
ured VLANs.
MAPs per WX WX4400:
■ 300 configured
■ Up to 120 active, depending on
the MAP type and licensing
WX2200:
■ 320 configured
■ Up to 120 active, depending on
the MAP type and licensing
WX1200:
■ 30 configured
■ 12 active
WXR100:
■ 8 configured
■ 3 active
Includes directly attached MAPs and
Distributed MAPs. Inactive configura-
tions are backups.
Minimum link speed within a Mobility
Domain
128 Kbps