Setting I/O Options . . . continued
3) Press the [REF] (yes) key to enter
I/O Options.
4) Select Baud Rate. Repeatedly
pressing the [REF] (other) key will
increment through: "300", "600",
"1200", "2400", "4800", and "9600."
After making selection, press the
[FUNCTION] (next) key to save
setting and advance to next option.
5) Select Line Feed option. Press [REF]
(other) key to alternate between "LF
WITH CR=OFF" and "LF WITH
CR=ON."
After making selection, press the
[FUNCTION] (next) key to save
setting and advance to next option.
6) Select Handshake option.
Repeatedly pressing the [REF]
(other) key increments through
"OFF", "CTS", "BUSY", and
"XON/XOFF ENABLED."
After making selection, press the
[FUNCTION] (exit) key two times to
save and exit.
7-6
FUNCTION SETUP REF
no yes
SET I/O?
FUNCTION SETUP REF
next
other
BAUD RATE = 9600
FUNCTION SETUP REF
next
LF WITH CR = ON
FUNCTION SETUP REF
exit
other
HANDSHAKE = OFF
OFF
CTS
300, 600
1200, 2400
4800, 9600
other
ON
OFF
BUSY
XON/XOFF ENABLED
PRESS TWO TIMES TO EXIT
