Pass/Fail and 555 Shade Tag Measurements . . . continued
Failed sample using delta numbers
and pass/fail & 555 function
- 1 long beep will be heard to
indicate failed sample.
- When a tag number (L*, a*, or b*)
is out of range (depending on
setting), an arrow will indicate the
direction. The "↑" arrow indicates
over and the "↓" arrow indicates
below. The fail signal is based on
tolerance values assigned to Setup
#3.
☛
The [REF] (continue) key must be pressed to
continued to next display screen, if "WAIT ON
FAIL" option is set to "On." Refer to Section 7.1
Operation Options for more details.
Passed sample using delta words and
pass/fail & 555 function
- 3 short beeps will be heard to
indicate passed sample.
- "Delta Words" is selected in
Operation Options, Section 7. The
sample passed, but is slightly
"LIGHTER", "DULLER", and towards
"RED."
☛
If any attribute matches the reference exactly, no
description will be given for that attribute.
3-16
➩
SAMPLE FAILED !
FUNCTION SETUP REF
continue
25 S:3
C* -1.60
H* +.04
L* -8.42
LIGHTER
DULLER
>>RED
655 S:2
