A SERVICE OF

logo

Simple Compare Reference Entry . . . continue
4) Reference Measurement
- Press the [SETUP] (read) key.
- Position target window over
reference to be measured. Lower
unit to target window and hold
compressed.
"READING REFERENCE" is
displayed. Release unit after
"READING COMPLETE" is displayed.
If an error message occurs during the
measurement, try reading reference sample
again. If error message still occurs, refer to
Display Message in Appendix B.
5) The reference data is entered and the instrument automatically returns
back to Simple Compare function.
Refer to Section 4.3 for measurement operation.
Reference
FUNCTION SETUP REF
SELECT
exitenter read
READ REFERENCE
exit
4-4